• Magnetic Engineering & Industrial Supply in Johor Malaysia

Industrial Grade Magnet Supplier in Johor

As the leading magnetic products supplier based in Johor, we are able to offer best grade of magnets in variety of size and materials.
Regardless magnet cubes, cylinders, disks, bars, ring, blocks comes with countersunk hole or magnet rod with M8 screw hole, just submit your requirement and let our sales representative serve you.

In general, these magnet easily found in Malaysia:
• less expensive and moderate strong ferrite magnets
• very strong neodymium magnets
• AlNiCo magnets for special application

NEODYMIUM (NDFEB) MAGNET

Neodymium magnets (NdFeB) are composed of neodymium, iron, boron and a few transition metals. Commonly you can find them in silver colour as it plated with nickel or chrome while black colour with an epoxy coating for higher corrosion resistant . So far it is the best value rare earth magnet and most powerful magnets in Malaysia market.

Neodymium magnets are approximately 10x stronger than other type of magnet material and offer excellent size to strength ratio with good temperature stability. This means you will be able to use a much smaller Ndfeb magnet in same application/project of the other magnet type but the holding force (gauss) will be the same effect.

Because Ndfeb magnets are way too strong, please take special care when handling the smaller sizes as these magnets are so powerful that they can easily injure you (snapping back together after separated). Pull it off vertically is the correct method to separate two sticked neodymium magnet.

Our neodymium magnets are available in variety of size depends your requirements such as rings, bar, countersunk, custom, disc, cylinder.

In Malaysia, strong neodymium magnets have millions use in industrial applications: Machine and plant engineering, moulding making, steel separator, medical equipment, automotive industry, waste recycling, electric motors, generators, printer assembly and loudspeakers etc.

Neodymium Magnet Bar

ndfeb-magnet-bar-1

Neodymium Magnet Block

ndfeb-magnet-block-1

Neodymium Magnet Cube

ndfeb-magnet-cube-1

Neodymium Magnet Button

ndfeb-magnet-button-1

Neodymium Magnet Button With Bore

ndfeb-magnet-button-hole-1

Neodymium Magnet Button With Countersink

ndfeb-magnet-button-countersink-1

Neodymium Magnet Ring

ndfeb-magnet-ring-1

NdFeB Curved Magnet

ndfeb-magnet-curved-1

NdFeB ARC Magnet

ndfeb-magnet-arc-1

NdFeB Triangle Magnet

ndfeb-magnet-triangle-1

Magnet Hooks (Salvage Tool)

NdFeB Magnet Hanger

Hand Held Magnet Rod (Easy Removal)

High Power Magnet Rod

NdFeB Magnetic Filter/Separator

ndfeb-magnetic-filter-separator

Magnetic Filter (Circular Type)

Magnetic Filter (Double Layer)

Magnetic Strainer (Single Layer)

Magnetic Pulley

Magnet-Pulley-Malaysia

Suspension Magnet (Eye Bolt)

suspension-magnet-malaysia

Suspension Magnet (Hinged)

Hinge-Suspension-Magnet

FERRITE MAGNET

Ferrite magnets or so called ceramic magnets are composed of strontium carbonate and iron oxide. They are charcoal gray in color and usually appear in the forms of discs, rings, blocks, cylinders, and sometimes arcs for motors.
Ferrite magnets are the magnets you usually see everywhere – on your fridge, in hooks to hold something, in your shower curtain, in your audio speakers etc due to their cost effective friendly pricing.
Ferrite magnets are easy to demagnetization when exposed to high temperature environment.
Ferrite magnets are preferred by many manufacturers due to their good resistance to corrosion and low cost.

ALNICO MAGNET

Alnico magnets are made primarily from aluminum, nickel, cobalt, copper, iron and some titanium. They can be either cast or sintered. Grade of alnico magnets can be categorized to Alnico 2, Alnico 5, Alnico 5-7, and Alnico 8.
Alnico Magnets are the weakest of permanent magnets however they have excellent temperature stability (up to 500°C working temperature) and very good non-corrosiveness. Their mechanical strength is greater than either Neodymium or Ferrite. Alnico Magnets can easily be demagnetized due to its low coercive force abd cause it is uncommon and rare in Malaysia.

Applications of Alnico Magnets:
• Clutches and bearings
• Generators
• Electron tubes
• Loudspeakers
• Sensors

MAGNETIC LIFTER / MAGNET CHUCK

Magnetic Lifter or Magnetic Chuck made by strong permanent magnet material which is Neodymium (NDFEB), commonly using in industrial or heavy duty application such as marine, port, constrution, factories, warehouses or transportation.

This is a useful magnetic tools to lift up few hundred kg steel blocks easily.

Magnetic lifter comes with a hook and On/Off feature to turn off the magnetic power via the manual handle.

MAGNETIC FIELD MEASURING TOOLS

Handy gaussmeter or so called Tesla meter help us to measure the magnetic performance of your magnet products. It is widely using In the food processing industry and CNC machining process to inspect and make sure the iron-removing process by magnet filter/separator set was effective. Switchable measurement value displaying in “mT”and “G”.

Application for handy gauss meter:
Measurement of residual magnetism in machined works.
Measurement of magnetic flux in magnetism-applied products.
Measurement of magnetic flux of motors.
Measurement of properties of magnetic materials.
Inspection of mechanical stress in stainless steel products.
Inspection of natural magnetization of various steel materials.